So since I was last here I have been very busy. I have made 3 dresses for myself, one for my daughter, 2 handbags, 4 canvas for our house, and lots of other bits and pieces; as well as my daughter going to Japan for a school trip and my son having specialist teaching sessions. One thing I haven't done a lot of is scrapbooking. However as the retreat is this coming weekend I thought I better do something. I found inspiration on the "white with one" blog.
Sunday, February 8, 2015
So lately I have been doing canvas art to decorate the walls of our new house. Mum asked me to do one for them as they have a wall that needed something. It had to be forest green to match the couches & lemon to match the curtains. So mum bought the canvas and supplies for me....my summer holiday project and my first commissioned art. Here it is completed, it is 2m high by 1.4m wide.
Mum and dad were asking about my process so I thought I would share it here. I have idea what the finished piece is going to look like when I start, it evolves itself, therefore I did not want them to see it while I was doing it.
We bought a canvas screen to use as it was the cheapest way to get such a large canvas.
So first I started by painting it black so I had a blank canvas to start with & to try to cover the green.
We have some tires out the back that they didn't collect during the hard rubbish collection & Dad is into motorbikes & cars so I tried to use the tire as a stamp into texture paint. Unfortunately it did not work, I think my paste was to wet, but because of the large size of the canvas it was difficult to judge drying times. Also the cat walked through the texture paint leaving nice paw prints (I tried to keep them as my parents their love cats). But I didn't like the stripes especially as it was being hung vertically now.
I have learnt about my own process doing this for them. I do personal symbolism. I can't just do something. So once I came up with the idea to put a symbol of mum & dad in the center of a circle & do some of their life influences in other circles it really started to get going. The concentric rings are like sound waves showing how mum & dad affected NZ, SA, car/motorbike stuff & church & how it affected them. To make theses circles I used the tissue technique that we learnt at camp one year. So it is not rope, but rather rolled up tissues & Modge Podge. I did look at using rope or cord but it was going to be to expensive & I was worried that it might not stick properly. I used the old pen on a piece of sting trick for a giant compass, hehe
I then used a scrunched up single ply of tissue over the entire background of the 3 canvases & painted them black, except the center large circle which was white as it was going to be the yellow 'sun' center. Finally time to add some colour!!!!
Cutting the chipboard for the tire track was not fun, it takes a lot of work to get through card that thick. But I am happy with how it looked in the end. This was the bottom left corner.
I was trying to blend the lemon to dark green through the circles, but I din't like how it came out. At this stage I hated & and wanted to throw it away so I left it alone for a few days.
Here is a closeup of 'mum & dad' in the center. It is a clipart image that I printed & then cut out of cardboard.
I have this really cool rub on metallic wax that i have been using on everything possible & tried it over my horrible stripes...slightly better.
and over the yellow
I was talking to mum & she mentioned wanting to sponge paint one of their walls & that set a spark off in my brain! of course! So I sponged over my hideous stripes with the dark green,much better. I didn't completely cover the colours under neath just blended them more. Then I decided to paint my rings solid green as they were getting lost. But now it was to green & not enough yellow so I got my scrapbooking stamps & inks out & stamped some bright yellows over the dark green, obviously they didn't show up a lot, just enough, I was pleasantly surprised when I added the varnish later & it brought out the yellows ink more looking very cool.
Now it was to plain, it needed more...more something. One of the supplies we bought at the very beginning were some polished stones. We glued these along with some beads & some of my CD UTEE pieces into the first ring around the tire track & on the inside of the track, hopefully looking like the stones were driven trough.
Later we decided it still needed more so made a glue 'paint' of sand to fill the gaps, then I sprinkled it with giant gold glitter as you can never have enough bling ;-) Nicola loved doing the sand painting & also decided we had to sand paint the NZ corner also.
I had a tissue paper map from some Colorado shoes we bought years ago that i decided would be great down in the bottom right South African corner. (I miiiiggghhhttt be a hoarder of things that I am sure I will need sometime in the future.)
Of course I had to cover the Colorado label with something....this was the first sneak peak I sent mum & dad.
To add more texture & layers I wrote some words around New Zealand about NZ & Mum & Dad, like all their different addresses over the years. I did the same with SA. Then I stamped over the top & lightly sand painted it as I didn't want it to be too obvious. Later I added Fimo ferns over the top (see finished photo) this was not my fave corner, but it was ok.
Top right corner had a cross in the center of the circle. I decided to stick a metal foil cross over the top to make it 'more'. I wrote mum & dads fave bible verses around the circle. I just did my normal handwriting as that was part of the point that made it for them & they could recognise that. Then I stamped some green over the top of the writing, then came the fun part! Mum also wanted some red in the painting & what is red & goes with a cross? Splatter time! Some much fun! I decided I needed to do more splatter painting! Once the 'blood' was dry I added a gold ring (see final picture above)
I did say more splatter! Part of my original concept was that mum & dad were the center of the 'sun' but I felt that was a bit lost, also needed more yellow & SPLATTER! Nicola & I had lots of fun with some bright yellow paint. I covered the center with wax paper first as I didn't want any 'rays' on the center of the sun.It took ages ro decided on the final placement of the cluster of embellishments around the center, many, many trails. Not 100% happy with them still, but decided I never would be.
So finally after a month and a half Mum & Dad got their art & I got to park my car in the garage again!
PS Sorry some of the pictures are the wrong way up, I dont know why the blog decided to do this.
Supplies used: 2 boxes of tissues, 1 bottle of texture pastes, 2 big bottles of Modge Podge, 250ml bottle Jo Sonja's Satin Varnish, 2 lemon (Resene Smiles) testpots, 4 (Karatokie) green Resene testpots, 2 bottles black Gesso, 1 bottle white Gesso......and many,many more.......
Posted by Kerry-Sue Thomson at 3:11 PM
Wednesday, March 19, 2014
Scrapaholics had a fundraising crop day for Hand in Hand. Hand in Hand in a free beautician service for women with cancer.
I had a great day with lovely ladies & I didn't get much done,but it got me inspired. These are most of the layouts I did at the crop & days following.
This is from Maggies class:
I ended up buying the Basic Grey new releases kit. As usual I used the instructions as a general guide...
Basic Grey - Highline
Basic Grey - Capture
Basic Grey - Spice Market & Capture
Basic Grey - Capture
Basic Grey - Highline
Basic Grey Spice Market & Capture (& really old Basic Grey)
There are others in various stages of completion, but I figured this was enough for one post ;)
Wednesday, February 19, 2014
Wall 1 finished! This is the internal wall between the kitchen & wall/entrance. Below is the kitchen side complete with real brick backing for the stove.
This is the entrance side. I inked the paper in an earlier post. As the entrance is the first impression that guests got I was as opulent as possible to show owners wealth/status.
I was originally trying to do 'wood' panels with gold highlights, but decided to go all out with the gold. It is only a dollhouse afterall. I used hubby fancy paints again & love the way the panels almost look like leather.
Sunday, February 2, 2014
My 'Priest Hole'
I cut a hole in the subfloor to create a root cellar or Priest Hole under the kitchen floor. They featured in my fave series of books - The Outlander Series by Diana Gabaldon. I am not sure if it completely historical correct to have one but I wanted one. Originally I closed the gaps at the back properly, but once the floor is put over the top it is pretty dark so I figured the tiny bit of light might be good. The little Bible has only 6 tissue pages & no writing (baby wanted writing, but once the floor is on it wont matter) Same with the white blanket, I know it should be grey but I wanted the brightness. There is 'glass' to the front for viewing purposes.
Tuesday, January 28, 2014
Laying my mini hardwood floor (paper)
Finished one room, it looks really good, I am very pleasedSlave to Painting.
Back to work....
Sunday, January 19, 2014
I was so excited I opened the box at work, hehe. 3 packages inside but no instructions, just as well there is both a video & written instructions on their website. The first box contained a lot of little pieces, windows, chimney, the 3 stair cases already made up. Number 2 was the walls & number 3 was the floors & large roof pieces. The subfloor was built & taped together, I did wonder why until I shook it....
It's like Christmas! (actually better)
The detail on the handrails is mind blowing, so fine I don't know how he managed to cut it without breaking them. The kit is made of 3mm ply & not easy to cut so I have re thought some of the modifications I was planning. (A dollhouse doesn't have to be weathertight anyway)
This is the subfloor painted. I am still waiting for my bricks to arrive so I can continue. I shall add the flock grass at the end so it doesnt wear off from handling. I have not decided if I am bricking the internal walls you see through the subfloor or not, it might depend on how good I am at miniature bricklaying.
The walls came with 'weatherboard' lines scored into them. I dont like this, I want 'real' weatherboards. So off to the model shop I went & now I have a mini saw, mitre box, & plastic strips (called Evergreen ?!?) to make weatherboards. They were really easy to do & look awesome!
Now I need to think of something for the roofing......ideas?